Error Code - Sony SLV-E177EG Service Manual

This set displays an error code, and a mode code in case of error
on the display tube, if the operation stopped by error.
The following provides description concerned.
Display tube (lower 5 digits)
A
A: Error code ............................................................... Table 6-1
B: Mode code in case of error .................................... Table 6-2
These codes are displayed at lower 5-digit positions of display
tube.
In this case, " : " between digits is not displayed.
Table 6-1. Error Codes
Code
0 NO ERROR
1 CAM ENCODER ERROR, LOAD DIRECTION
2 CAM ENCODER ERROR, UNLOAD DIRECTION
3 T REEL ERROR
4 S REEL ERROR
5 CAPSTAN ERROR
6 DRUM ERROR
7 INITIALIZE ERROR
8 CASSETTE UNLOADING ERROR
9 RESERVED
SLV-E130/E177/E180/E230/E285/E295/E380/E430/E477/E480/E530
SECTION 6
ERROR CODES
B
Description
Table 6-2. Mode Codes in Case of Error
Code
0 POWER-ON EJECT
1 POWER-ON INITIAL
2 POWER-OFF EJECT
3 POWER-OFF STOP
4 FF
5 REW
6 REC
7 REC-PAUSE
8 POWER-ON STOP
9 PB
10 FWD R1
11 FWD R2
12 CUE
13 PB-PAUSE
14 RVS-PAUSE
15 RVS R1
16 RVS R2
17 REV
18 POWER-OFF INITIAL
19 MECHA ERROR (POWER OFF)
20 REW PLAY
21 CAS LOADING
22 TAPE LOADING
23 POWER-OFF LOADING
24 MECHA ERROR (POWER ON)
25 POWER-ON EJECT INITIAL
26 POWER-OFF EJECT INITIAL
27 APC REC
28 CAS LOADING (NO AUTO PB CHECK)
6-1 E
Description