HoMedics AF-75 Instruction Manual And Warranty Information page 5

Fig. 4
NOTE: Unit will not operate unless filter and grill are properly installed.
1. On/Off and Fan Speed Settings
• To turn the air cleaner on, press the ON/OFF
on, the ON/OFF Control will illuminate and the air cleaner will start to operate on
LOW speed.
• This air cleaner has 3 fan speed settings: LOW (1), MEDIUM (2), and HIGH (3).
The higher the fan speed setting, the more air will be cleaned. To select or
change fan speed, slide the FAN SPEED
reached.
• To turn the air cleaner off, press the ON/OFF
4. Place the tabs at the bottom of the
grill plate into the base of the unit.
Gently push the grill plate back into
place until you hear a click sound
indicating that the grill is firmly
latched. Fig. 4
Plug the power cord into a standard
AC outlet.
Control. When the air cleaner is
Control until desired speed is
Control.
8
Clean Filter Indicator Button
This air cleaner is equipped with a CLEAN FILTER indicator button to let you know
when the HEPA filter requires cleaning. Generally this is every 480 hours of use.
When the HEPA filter requires cleaning, the CLEAN FILTER indicator button on the
control panel will illuminate.
If the air cleaner is used daily, we recommend cleaning the HEPA filter more
frequently.
Replacing HEPA Filter
With regular cleaning the life of the HEPA filter is approximately 12-18
months under typical household usage and conditions. We recommend
replacing your filter every year. To purchase replacement HEPA filters,
model # AF-75FL, go back to your retailer (where you purchased your air
cleaner), or visit www.homedics.com.
After cleaning or replacing the HEPA filter, be sure to reset the
filter indicator by pressing the CLEAN/RESET FILTER INDICATOR
BUTTON for several seconds until an audible chime sounds and the
light turns off.
9