Connection - Kenwood DPX792BH Instruction Manual

Wiring connection
When connecting to an external amplifier, connect its ground wire
to the car's chassis to avoid damaging the unit.
Rear/ front/ subwoofer output
To front speaker (left)
To front speaker (right)
To rear speaker (left)
To rear speaker (right)
Car fuse box
Ignition switch
Car fuse box
Battery
34
Antenna terminal Fuse (10 A)
White
White/Black
Gray/Black
Green
Green/Black
Purple
Purple/Black
Red (Ignition wire)
Yellow (Battery wire)
Black (Ground wire)
To the metallic body or chassis of the car
IMPORTANT : We recommend installing the unit with a commercially available
custom wiring harness specific for your car and leave this job to professionals for your
safety. Consult your car audio dealer.
Expansion port (12 V
To the optional SiriusXM Vehicle Tuner (commercially available) ( 12)
If no connections are made, do not let the wire come out from the tab.
Gray
Brown
(Mute control wire)
Blue/White
(Power control wire/
Antenna control wire)
Light blue/yellow
(Steering remote control
wire)
MIC (Microphone input terminal) ( 15)
/ : USB cable (DC 5 V
500 mA)
To connect the Kenwood navigation system,
refer your navigations manual
To the power control terminal when using the
optional power amplifier or to the antenna
control terminal in the vehicle
To the steering wheel remote control adapter
1.5 A)