Table of Contents
Advertisement
3.
In the Selected Array window, review current port and session information.
4.
Click Config Wizard, to start the iSCSI configuration wizard.
5.
Complete the steps in Config Wizard to configure your iSCSI storage array.
6.
In the Array Configuration Summary window, review and apply your configuration settings.
7.
Click Create iSCSI Sessions, to create host-to-storage array communication.
Repeat for all host-to-array mappings you want to implement.
8.
Verify that communication is established between the storage array and host server.
NOTE: For more information on MDCU, see the MDCU online help.
Post Connection Establishment Steps
After iSCSI connectivity is established between the host server(s) and the storage array, you can create
virtual disks on the storage array using MD Storage Manager and these virtual disks can be utilized by the
host server(s). For more information about storage planning and using MD Storage Manager, see the
Administrator's Guide at dell.com/powervaultmanuals.
28
Advertisement
Table of Contents
