Motorola Talkabout T6250 User Manual page 54

Symptom
Message not
received
52
Confirm radios have the same channel and interference
eliminator code settings.
Make sure M is NOT being pressed while trying to listen.
Reposition, replace, or recharge batteries.
If QuieT6000 feature is on, transmit call tone before talking.
If QuieT6000 feature is on, with only VibraCall
selected, a received call must be acknowledged by pressing
any button (or a VOX activation) before the radio can receive
any incoming transmissions.
Obstructions and operating indoors, or in vehicles, may
interfere -- change location.
Verify that the radio is not in Scan mode.
Eavesdrop Reducer code is on, or setting does not match
other radios; all radios must use the same Eavesdrop
Reducer code.
Try This:
®
alert