Table of Contents
Advertisement
Channel
•
With radio On, press
•
Use
and
[
]
•
Press
to set new Channel.
M
Interference Eliminator Code (T5400 Only)
The interference eliminator codes help minimize interference by
providing you with a choice of code combinations.
•
To set the code, press
•
Then press
[
•
Press
to save the code setting.
M
You must set the Interference Eliminator Code to 0 on a T5400 to communicate with
a T5300.
You can specify a different code for each channel. To set a channel and code
combination, press
again and then press
save the channel and code combination. To set another channel and code
combination, repeat these steps.
Volume
•
Rotate
while holding down
P
•
Rotate
clockwise to increase and counter-clockwise to decrease volume.
P
, Current Channel will begin to flash.
\
to change Channel while flashing.
until the code display begins to blink.
\
or
to set the code.
]
and then press
\
or
to select a code. Press
[
]
until you reach a comfortable listening level.
Q
or
to select the channel. Press
[
]
M
\
to exit the menu and to
15
Hide quick links:
Advertisement
Table of Contents
