Locking Soft Top Manually
In case of malfunction, the power soft
top can also be raised manually. This
procedure should be performed with
great care by 2 persons.
A combination open-end/ Allen-head
wrench in the vehicle tool kit is
required for this job.
1. Open doors or lower windows.
2. Lower roll bar with roll bar
switch. If the roll bar cannot be
lowered, the soft top can be
carefully guided over the roll
bar.
3. For safety reasons from
steering lock.
Warning!
Do not place your hands near the
roll bar, soft top frame, upper
windshield area or soft top storage
compartment while the soft top is
being locked. Serious personal in-
jury may occur.
4. Unlock left and right soft top
storage compartment locks: Place
open-end wrench on bolt between
roll bar and storage compartment
cover. Turn wrench towards rear
of car (1).
Open storage compartment cover
and place in upright position (2).
5. Pull soft top (3) together with soft
top bow (4) out of compartment.
121