Table of Contents
Advertisement
17
SERVICE WORK ON THE ENGINE
–
Insert oil filter
–
Oil the O-ring of the oil filter cover. Mount oil filter cover
–
Mount and tighten the screws.
Guideline
Screw, oil filter cover
Info
Too little engine oil or poor-quality engine oil results in premature wear to the
B00776-10
engine.
–
Remove the oil filler plug
engine oil.
Engine oil
–
Install and tighten the oil filler plug with the O-ring.
B00773-11
Danger
Danger of poisoning Exhaust gases are toxic and inhaling them may result in
unconsciousness and/or death.
–
–
Start the engine and check that it is oil-tight.
.
with the O-ring from the clutch cover and fill up with
1.5 l (1.6 qt.)
When running the engine, always make sure there is sufficient ventilation,
and do not start or run the engine in an enclosed space without an effective
exhaust extraction system.
.
M5
8 Nm (5.9 lbf ft)
External temper-
Engine oil
ature: 0... 50 °C
(SAE 15W/50)
(32... 122 °F)
(
p. 165)
External tempera-
Engine oil
ture: −10... 40 °C
(SAE 10W/40)
(14... 104 °F)
(
p. 165)
141
Advertisement
Table of Contents
