Preload Adjustment - Honda GoldWing GL1100 Service Manual

Hide thumbs Also See for GoldWing GL1100:

Table of Contents

Preload Adjustment - - - - - - - - - - - - - - - - - - - -

irlspection tool onto

retainer, and gear case

whenever the

gear assembly.

NOTE: Use this

retainer is removed.

Remove the dust

the wire around the tool groove and attach a

scale. Measure the

force needed to turn the

shaft in the normal direction of rotation.

Pinion Gear Preload:

1,000 • 1,200 9 (2.2 - 2.7 Ib)

measurements are not consistant, rotate the

gear 50 • 60 turns, then check preload.

movement may exceed

is ins:ufficiEmt, remove the

irlspection tool,

then install

gear retainer wrench and

gear prs!load

is excessive. remove the

then install the

gear retainer wrench and loosen

tool, then recheck pinion

Troubleshooting