JVC LT-Z26EX6 Service Manual page 11

3.1.8 REMOVING THE SW PWB (Fig.2)
• Remove the STAND.
• Remove the REAR COVER.
(1) Remove the 2 screws [A].
(2) Remove the CONTROL ASS'Y with SW PWB.
(3) Remove the 2 screws [B].
(4) Remove the SW PWB from the CONTROL ASS'Y.
3.1.9 REMOVING THE LED PWB (Fig.2)
• Remove the STAND.
• Remove the REAR COVER.
(1) Remove the 2 screws [C].
(2) Remove the LED PWB.
3.1.10 REMOVING THE SPEAKER (Fig.2)
• Remove the STAND.
• Remove the REAR COVER.
(1) Remove the 6 screws [D].
(2) Remove the SPEAKER (L /R).
D
D
SPEAKER
FRONT PANEL
SW PWB
B
A
CONTROL
ASS'Y
MAIN BASE
F
G
G
J
TOP FRAME
LED PWB
C
A
3.1.11 REMOVING THE LCD PANEL UNIT (Fig.2)
• Remove the STAND.
• Remove the REAR COVER.
• Remove the BACK BRACKET.
• Remove the POWER CORD HOLDER.
(1) Remove the 2 screws [E].
(2) Remove the STAND BRACKET.
(3) Remove the 2 screws [F].
(4) Remove the MAIN BASE.
(5) Remove the 4 screws [G] and 4 screw [H].
(6) Remove the LCD PANEL UNIT with TOP/BOTTOM
FRAME.
(7) Remove the 2 screws [J].
(8) Remove the TOP FARAME from the LCD PANEL UNIT.
(9) Remove the 2 screws [K].
(10) Remove the BOTTOM FARAME from the LCD PANEL
UNIT.
F
STAND BRACKET
F
J
LCD PANEL UNIT
FRONT
Fig.2
E
SPEAKER
D
The terminal of a connector is turned up and connects.
Surely insert and lock.
terminal side
Check that connector is inserted completly.
(Don't insert aslant)
"LVDS CABLE"
Black
white
white Black
LCD PANEL SIDE
DIGITAL PWB SIDE
K
BOTTOM FRAME
K
This exploded view shows the 32 inch models.
26 inch models have almost similar parts
locations.
(No.YA456)1-11
D
H