Polaris 2015 RZR 900 Service Manual page 301

7. Remove the RH output hub assembly from the
gearcase housing.
8. Remove pinion seal, internal retaining ring and
pinion gear assembly from the gearcase housing.
Inspect and clean the gearcase housing and replace
all oil seals and O-rings.
9. Inspect the pinion gear for chipped, broken or
10. Inspect the AWD coil located in the outer cover plate
11. Remove the roll cage assembly and rollers from the
9925723 R01 - 2015 RZR 900 Service Manual
© Copyright 2014 Polaris Industries Inc.
missing teeth. Inspect the pinion bearing for signs of
wear and the pinion shaft seal surface for pitting.
assembly. Refer to AWD Diagnosis, page 7.24 for
detailed inspection process. Replace the cover plate
seal and O-ring.
clutch housing. Use a shop towel to cover the
housing in order to retain all the rollers.
NOTE: Rollers are spring loaded. Take care not
to allow them to fall out or lose them upon
removal of the roll cage.
FINAL DRIVE
7
7.27