Keys And Remote Controls; General Information On Radio; Frequencies; Programming The Remote Control - Ford Figo Manual

GENERAL INFORMATION ON
RADIO FREQUENCIES
CAUTIONS
The radio frequency used by your
remote control can also be used by
other short distance radio
transmissions (e.g. amateur radios,
medical equipment, wireless headphones,
remote controls and alarm systems). If the
frequencies are jammed, you will not be
able to use your remote control. You can
lock and unlock the doors with the key.
Check your vehicle is locked before
leaving it unattended. This will
safeguard against any potential
malicious frequency blocking.
Note: You could unlock the doors if you
press the buttons on the remote control
unintentionally.
The operating range between your remote
control and your vehicle varies depending
on the environment.
PROGRAMMING THE REMOTE
CONTROL
A maximum of four remote controls
(Coded Keys) (including the ones supplied
with the vehicle) can be programmed.
E102144
To programme a new remote control:

Keys and Remote Controls

Turn the ignition key to position II four
times within six seconds.
Switch off the ignition. Cluster indicator
flashes to indicate that it is now
possible to programme a new remote
control.
Press any button on a new remote
control. Cluster indicator flashes as
confirmation. Repeat this last step for
all of your remote controls, including
the original.
Switch the ignition back on or wait for
ten seconds without programming
another remote control to end remote
control programming. Only the remote
controls which you have just
programmed are now able to lock and
unlock your vehicle.
Re-programming the unlocking
function
You can change the unlocking function so
that pressing the unlock button once
deactivates the central locking and unlocks
the driver's door. Pressing the unlock
button twice within three seconds also
unlocks the passengers' doors.
E72190
20