Checking Jumper Settings - ECS BAT-I2 User Manual

2-3. Checking Jumper Settings

This section explains how to set jumpers for correct configuration of the
motherboard.
1. CLR_CMOS: Clear CMOS Jumper
The following illustration shows the location of the motherboard jumpers. Pin 1 is
labeled.
To avoid the system instability after clearing CMOS, we recommend users to
enter the main BIOS setting page to "Load Default Settings" and then "Save
and Exit Setup".
8
No. Components
1 CLR_CMOS
2 LCD_PWR (optional)
3 BKLT_PWR (optional)
BAT-I2 USER MANUAL