Crankshaft, Balance Shaft And Starter Drive Gear Installation - Polaris RANGER RZR 170 Service Manual

Crankshaft, Balance Shaft and Starter Drive
Gear Installation
1. Install woodruff keys on the balancer shaft and
crankshaft.
2. Install and align the marks of the balance shaft gear
and the crankshaft gear as shown.
Alignment marks
3. Install the oil pump drive sprocket, washer and slotted
nut onto the balance shaft.
4. Using Slotted Nut Socket PA-47344, tighten the nut to
the specified torque.
B
Install
Balance Shaft Slotted Nut:
43 ft-lbs(59 Nm)
Special Tool:
PA-47344
A
= T
9923983 - 2012-2013 RZR 170 Service Manual
© Copyright 2012 Polaris Sales Inc.
5. Install the Starter Drive one-way gear assembly,
washer and slotted nut.
6. Using Slotted Nut Socket PA-49935, tighten the crank
shaft nut to the specified torque. NOTE: Slotted nut is
left hand threaded.
Install
Crankshaft Slotted Nut Torque:
43 ft-lbs (59 Nm)
Special Tool:
PA-49935
ENGINE
= T
3.37
3