Table of Contents
Advertisement
Batteries
T5100 and T5200 radios operate with 3 AA alkaline
batteries providing approximately 30 hours of use.
That is almost 3 hours of talk and over 27 hours of
standby time.
To Install:
1. With back of radio facing you, flip Battery Cover Latch
up to release. Lift cover off. Fig. 1.
2. Insert 3 AA batteries as shown. Fig. 2.
3. Reposition Battery Cover, flip Battery Cover Latch
down to secure.
Radio Etiquette:
Your radio has multiple channels shared on a "take turns" basis. This means
other groups may be talking on the channels. For uninterrupted
communications, do not talk over someone who is already using the channel –
your message may not be completely heard. Try changing the channel to
avoid channel congestion or use the Monitor button to check for channel
activity. If you hear static while holding down the Monitor button the channel is
clear for use.
Note: Since the channels are shared, your conversations will not be private
and you may hear others talking.
Battery Cover Latch
Figure 1
Figure 2
3
Hide quick links:
Advertisement
Table of Contents
