Table of Contents
Advertisement
Setting the Time and Date
From the Standby screen, press and release * until CONTROLS? displays. Press
+ to enter the CONTROLS menu. Then press *+ to enter TIME–DATE
mode.
• Press * to set the hour to the desired value.
• Move to the Minute, A.M./P.M., Date and Month
12:00 A
1/01
fields by pressing +, then press * to set the
value for each field.
Note: To display a 24-hour clock, set the AM/
PM field to _.
• Press ) from any field to set and exit.
Choosing the Scroll Speed
You can choose the speed at which your messages scroll, or read them line by
line.
From the Standby screen, press and release * until CONTROLS? displays. Press
+ to enter the CONTROLS menu, then press **+ to enter the SCROLL
SPEED menu.
• Press * to choose the SCROLL SPEED you
H
desire.
LINE BY LINE =
• Press ) to set and exit.
Note: There are four scroll speeds: LINE-BY-
LINE, SLOW, MEDIUM and FAST.
Receiving/Reading Messages
When a message is received, the pager either alerts audibly (AUDIBLE, CHIRP,
ESCALERT and all PLEASING modes except NO ALERT) or vibrates (VIBRATE
mode).
If the NO ALERT mode is selected, no alert occurs for normal messages. The
unread message indicator § (normal message) flashes. The slot number of the
latest message displays on top.
Types of Messages
The message indicators define the type of message received and flash until the
message is read.
Message Type
Personal
Phone Directory
Information Services
when received
when selecting
when chirp is on
8
7
4
§ § § $
4
DINNER AT 7:30PM
4
MEET AT THE CLUB
9
10
Unselected
Selected
§
~
~
º
&
-
j
• Press ) to display the message status screen.
H
Press ) to read the latest message.
Note: The flashing unread message indicator
§ changes to $ when it is selected. To read a
different message, press + to select the
message slot number, then press ).
• The first screen of the message displays. If the
H
Q
message is longer than one screen display, a
message continued indicator Q appears on the
top line until the last screen is displayed.
• If the pager is set to scroll the message
H
Q
automatically (SLOW, MEDIUM or FAST scroll
speeds) the remainder of the message is
displayed at that speed.
• If the scroll speed is set to LINE-BY-LINE, the
remaining screens will automatically display one
line at a time every few seconds.
Note: To pause the message in any scroll
mode, press ). Press again to continue. In
LINE-BY-LINE mode, continue pressing )
until the last screen is displayed.
$
!
>
Advertisement
Table of Contents
