Control Play - Philips BM5B User Manual

1
Press on a slave speaker.
» The indicator on the speaker flashes
blue, while that on the previous master
speaker turns off.
» The GROUP indicators on both
speakers start flashing until the new
master speaker sets up connection
with its slaves.
» The volume indicator on the speaker
turns white while that on the previous
master speaker turns green.
2
Pair and connect your Bluetooth-enabled
device with the new master speaker (see
'Connect a Bluetooth-enabled device' on
page 8).
3
After successful Bluetooth connection, play
music on the Bluetooth device.
» Music streams from your Bluetooth
device to the whole group of speakers.
Switch to single mode
A Press GROUP on the master to enter
single mode.
» The slaves keep looking for the master
until timeout in 15 minutes.
» You can create a new group with the
slaves or press GROUP on a slave to
enter single mode.
Press GROUP on the master again to
•
resume group mode.
B Press GROUP on a slave to switch to
single mode.
» The GROUP indicator on the speaker
turns off, and the
blue.
Press GROUP again to rejoin a group.
•
» The GROUP indicator lights up again
and the indicator turns off.

Control play

Note
•
Due to data buffering, you may experience some
delay when you play/pause or adjust volume from the
Bluetooth device.
Control from the speaker
• In single mode, turn the
speaker on/off.
• In group mode, turn the
whole group of speakers on/
off.
• In single mode, pause/resume
(unavailable
play of the current speaker.
in AUDIO
• In group mode, pause/
IN mode)
resume play of the whole
group.
Volume • Press to mute/unmute the
knob
current speaker.
» The volume indicator
• Turn clockwise/anticlockwise
to increase/decrease volume
of the current speaker.
Control from the connected Bluetooth device
You can use controls on your
Bluetooth device directly.
indicator flashes
flashes when the speaker
is muted.
EN 11