Table of Contents
Advertisement
Press and release G until 3 is displayed.
Press I to move the cursor to the hour digit.
Press F or G to adjust the hour digit.
Repeat steps 4 and 5 to adjust the on and off time setting .
Press K to activate your selection.
The symbol _ is displayed in the Standby screen when private time is
enabled.
Note: If the on time is equal to the off time, private time is not enabled.
To Disable Private Time
K
Press
.
Press H to move the cursor to 3.
K
Press
.
µ
Press and release G until
is displayed.
K
Press
to disable private time.
Note: To exit from any screen without making changes, press
• If the pager's incoming message alert is set to silent (vibrate), all
maildrops with the alert set to on (j), produce a 2-second vibration
when a maildrop message is received.
• If the pager's incoming message alert is set to audible, the maildrop
alert can be set to either the standard alert, one of the seven pleasing
alerts, a chirp alert, a chirp and silent alert, or no message alert via the
Choose-alert menu. The length of the maildrop alert is 2 seconds.
• If the pager's incoming message alert is set to no message alert,
maildrop alerts cannot be set and all maildrop symbols are automatically
displayed as V.
Turning Individual Maildrop Alerts On and Off
From the Message-status screen, press H, I, or G to move the cursor
to the desired maildrop.
K
Press
.
Press I to move the cursor to j alert on or k alert off.
K
Press
to turn the maildrop alert on or off.
Maildrop/Information Service Option
Your pager is capable of receiving maildrop messages, also known as
information services. Maildrop messages are received and read the same
way as personal messages and the icon indicators are located on the
second row of the display.
Maildrop Alerts
When this option is enabled, you can set your pager to alert when maildrop
messages are received.
J
.
• A V in the maildrop message area indicates the alert is off for that
maildrop. A j indicates the alert is on for that maildrop.
23
24
Selecting a Maildrop Alert
From the Message-status screen, press H, I, or G to move the cursor
to the desired maildrop.
Press
Press I to move the cursor to j.
Press
Press H or I to move the cursor to the desired alert.
Press
unless no message alert is selected.
26
25
mgmmomm
VjV
P
(
Q
3:15PM
05/05/97
Example of Maildrop Indicators
K
.
K
. The choose alerts menu is displayed.
K
to activate the alert. The pager gives a sample of the alert,
Advertisement
Table of Contents
