Motorola VT2142 User Manual page 64

Overview
Click Protocol and click Add. The Select Network Protocol window is displayed:
6
Click Microsoft in the Manufacturers section and click TCP/IP in the Network Protocols section.
7
Click OK.
8
Click TCP/IP on the Network window. If there is more than one TCP/IP entry, choose the one for the Ethernet
9
card connected to the VT2142.
Click Properties. The TCP/IP Properties window is displayed:
10
Click the IP Address tab.
11
Click Obtain an IP address automatically.
12
Click OK to accept the TCP/IP settings.
13
Click OK to close the Network window.
14
Click OK when prompted to restart the computer and click OK again.
15
When you complete TCP/IP configuration, go to
page 62.
VT2142 Voice Gateway User Guide
Installation Troubleshooting
Configuration:
"Verifying the IP Address in Windows 98 or Windows Me"
Contact FAQ
Basic Advanced TCP/IP
Glossary License
on
54