Fm Radio Operation - ProScan PSB3713-OP User Manual

FM RADIO OPERATION

Before listening to the radio, please unwind and extend FM antenna or relocate
the unit to get better reception.
1. Power ON the unit as previously explained.
2. Press the Standby/Source button on the unit or press the SOURCE button
on the remote control until the indicator turns Green.
3.To search the band manually:
Press the /TUNE + or
forth manually.
4.To search the band automatically:
Press and hold the
control search the bands
when a band searched, it will stop and play the station.
Press the FM Scan button on the unit to search the bands automatically, when
a band searched, it will stop and play the station.
5. If the available FM station is stereo, the unit will plays it in stereo mode
automatically. If the reception is no good, press the MO/ST button on the
Remote Control to switch it to Mono mode. Press again to turn back to
Stereo mode.
/TUNE - button to search the bands back and
/TUNE + or /TUNE - button to on the remote
back and forth automatically.
10