Jensen SMPS-621 User Manual page 6

You can play music from your Bluetooth device wirelessly to SMPS-621 after
successfully pairing.
1. Selecting your favorite song, press the PLAY button on your Bluetooth device or
the /PAIRING button (#3) on SMPS-621 to play or pause the Bluetooth
/
device playback.
2. Slowly adjust both the VOLUME +/- buttons (#2/#5) of your SMPS-621 and your
Bluetooth device until you reach a comfortable listening level.
Notes:
1. Your Bluetooth enabled device will not play the music through the speaker,
even if connected (linked), if the device does not support the A2DP Bluetooth
profile.
2. Remember to turn off the SMPS-621 when you have finished listening, s et the
POWER ON/OFF SWITCH (#9) to the "OFF" position.
3. Don't forget to switch off the power of your external audio device as well
USING SMPS-621 AS A HANDS-FREE SPEAKERPHONE
To use your Bluetooth speaker as a speakerphone for receiving a phone call from a
Bluetooth enabled phone.
1. Follow the "PAIRING WITH YOUR BLUETOOTH DEVICE" section to set up the
Bluetooth connection with your smartphone.
2. When a call is received while music is playing, the music will be replaced by a
ringtone. Press the
3. Use the VOLUME +/- buttons (#2/#5) to adjust the desired volume level.
4. To ignore an incoming call, simply press and hold the
(#3) for about 3 to 4 seconds, a beep sound will be heard and the call was ignored.
5. When the call is completed, press the
the call. If you were playing music from the SMPS-621 before answering the call,
the music will automatically resume playing when you hang up.
6. Tap the
/
PLAYING FROM A BLUETOOTH DEVICE
/ /PAIRING button (#3) once to answer the call.
/PAIRING button (#3) twice to re-dial the last number you dialed.
/
/ /PAIRING button (#3) once to end
E-5
/PAIRING button