Sony SLV-D983P GI Operating Instructions Manual page 34

Dvd player/video cassette recorder
Hide thumbs Also See for SLV-D983P GI:
Table of Contents

Advertisement

To playback quickly or slowly with sound (DVD only)
You can listen to dialog or sound while playing the current scene quickly or slowly.
To playback quickly, press M during playback.
To playback slowly, press X, then press
Press
Notes
• You cannot set virtual surround effects while performing playback quickly or slowly with
sound. In addition, you cannot perform playback quickly or slowly with sound when a
virtual surround effect is set.
• You cannot perform DTS audio output during playback quickly or slowly with sound.
In addition, you cannot perform playback quickly or slowly with sound when DTS audio
output is set.
To Resume playback for the current disc (Resume Play)
The DVD player remembers the point where you stopped the disc even if the DVD
player enters standby mode by pressing ?/1.
1
While playing a disc, press x to stop playback.
2
Press H.
The DVD player starts playback from the point where you stopped the disc in
Step 1.
Tip
• To begin playback from the top of the disc, press x twice then press H.
Notes on playing DTS* sound tracks on a CD
• When playing DTS-encoded CDs, no audio out will be output from the analogue stereo jacks.
To avoid possible damage to the audio system, the consumer should take proper precautions
when the analogue stereo jacks of the DVD player are connected to an amplification system.
• Do not play DTS sound tracks without first connecting the DVD player to an audio
component having a built-in DTS decoder. The DVD player outputs the DTS signal via the
DIGITAL AUDIO OUT (COAXIAL) jack even if "DTS" is set to "Off" in "AUDIO SETUP"
menu (page 54), and may affect your ears or cause your speakers to be damaged.
Notes on playing DVDs with a DTS sound track
• DTS audio signals are output only through the DIGITAL AUDIO OUT (COAXIAL) jack.
• When you play a DVD with DTS sound tracks, set "DTS" to "On" in "AUDIO SETUP"
menu (page 54). You cannot select DTS audio stream when "DTS" is set to "Off".
• If you connect the player to audio equipment without a DTS decoder, do not set "DTS" to
"On" in "AUDIO SETUP" menu (page 54). A loud noise may come out from the speakers,
affecting your ears or causing the speakers to be damaged.
* "DTS" and "DTS Digital Out" are trademarks of Digital Theater Systems, Inc.
34
Playing discs
o return to normal playback.
H t
during playback.
y

Advertisement

Table of Contents
loading

Table of Contents