Mazda 2012 Mazda6 Owner's Manual page 234

CAUTION
When using the air conditioner while
driving up long hills or in heavy
traffic, closely monitor the
temperature gauge (page 5-42).
The air conditioner may cause engine
overheating. If the gauge indicates
overheating, turn the air conditioner
off (page 7-13).
NOTE
When maximum cooling is desired, set the
l
temperature control dial to the extreme cold
position and set the air intake selector to
the recirculated air mode, then set the fan
control dial to position 4.
If warmer air is desired at floor level, set
l
the mode selector dial at the
and adjust the temperature control dial to
maintain maximum comfort.
The air to the floor is warmer than air to
l
the face (except when the temperature
control dial is set at the extreme hot or cold
position).
qVentilation
1. Set the mode selector dial to the
position.
2. Set the air intake selector to the outside
air mode.
3. Set the temperature control dial to the
desired position.
4. Set the fan control dial to the desired
speed.
qWindshield Defrosting and Defogging
1. Set the mode selector dial to the
2. Set the temperature control dial to the
3. Set the fan control dial to the desired
Do not defog the windshield using the
control set to the cold position:
position
Climate Control System
position.
desired position.
speed.
WARNING
position with the temperature
Using the position with the
temperature control set to the cold
position is dangerous as it will cause
the outside of the windshield to fog
up. Your vision will be hampered,
which could lead to a serious
accident. Set the temperature control
to the hot or warm position when
using the position.
Interior Comfort
6-9