Verifying The Ip Address In Windows 95, Windows 98 Se, Or Windows Me - Motorola SB5100 Series User Manual

Introduction Before You Begin
The values for Adapter Address, IP Address,
Subnet Mask, and Default Gateway on your PC
will be different than in the image above.
In Windows 98 Second Edition, if IP
Autoconfiguration Address is displayed, call your
service provider.
SB5100 Series Cable Modem User Guide
Installation & Configuration
Verifying the IP Address in Windows 95,
Windows 98 SE, or Windows Me
To check the IP address:
1
On the Windows Desktop, click Start.
2
Select Run. The Run window is displayed.
3
Type winipcfg.exe and click OK. A window similar to the example at top left is
displayed.
4
Select your adapter name — the Ethernet card or USB device.
5
Click Renew.
6
Click OK after the system displays an IP address.
If after performing this procedure your computer cannot access the Internet, call your
cable service provider for help.
Troubleshooting FAQ Glossary License
37