Setting Up A Usb Driver In Windows Me - Motorola SB5100 Series User Manual

Introduction Before You Begin
SB5100 Series Cable Modem User Guide
Installation & Configuration

Setting Up a USB Driver in Windows Me

Be sure the SURFboard Cable Modem CD-ROM is inserted into the CD-ROM drive
before you plug in the USB cable. A few seconds after you complete the USB
connection, the Add New Hardware Wizard window is displayed.
1
Click Next. Windows automatically searches for the correct USB drivers and installs
them. If the installation is successful, the window at bottom left is displayed.
2
Click Finish to complete the installation. Otherwise, be sure the SURFboard Cable
Modem CD-ROM is correctly inserted in your CD-ROM drive.
When you finish setting up the USB driver, you can continue with
Windows 95, Windows 98 SE, or Windows Me"
Although your SURFboard cable modem model number may
be different than in the images in this guide, the procedure is
the same.
Troubleshooting FAQ
on page 23.
Glossary License
"Configuring TCP/IP in
20