Auto Correction Of Brightness And Contrast (Auto Lighting Optimizer) - Canon EOS Rebel T6 Instruction Manual

Auto Correction of Brightness and ContrastN
3
If the image comes out dark or the contrast is low, the brightness and
contrast can be corrected automatically. This function is called Auto
Lighting Optimizer. The default setting is [Standard]. With JPEG
images, the correction is applied when the image is captured.
In Basic Zone modes, [Standard] is set automatically.
Under [53: Custom Functions (C.Fn)], if [6: Highlight tone priority] is

set to [1: Enable], the Auto Lighting Optimizer will be set automatically to
[Disable] and the setting cannot be changed.
If the Auto Lighting Optimizer's effect is too strong and the image is too

bright, set [Low] or [Disable].
If a setting other than [Disable] is set and you use exposure

compensation or flash exposure compensation to darken the exposure,
the image may still come out bright. If you want a darker exposure, set
this function to [Disable].
Depending on the shooting conditions, noise may increase.

Select [Auto Lighting Optimizer].
1
Under the [z2] tab, select [Auto

Lighting Optimizer], then press
<0>.
Select the setting.
2
Select the desired setting, then press

<0>.
Take the picture.
3
The image will be recorded with the

brightness and contrast corrected if
necessary.
123