Location Of Controls; Description And Location Of Parts; Indicators On Display; Front/Rear Panel - Sony STR-KS1000P Service Manual

QQ
3 7 63 1515 0

LOCATION OF CONTROLS

Getting Started

Description and location of parts

Receiver
Front panel
1 2
?/1
Name Function
A ?/1
Press to turn the receiver
on or off.
B Display
The current status of the
selected component or a
list of selectable items
appears here.
C Input lamps
The lamp of the chosen
input source lights up.
D Remote sensor
Receives signals from
remote commander.
E INPUT
Press to select the input
SELECTOR
source to playback.
F MUTING
Press to mute the sound.
TE
L 13942296513
Name Function
K ;PL(II)
Lights up when the receiver
applies Pro Logic processing to 2
channel signals in order to output
the center and surround channel
signals. "; PLII" lights up
when the Pro Logic II Movie/
Music decoder is activated.
Note
Dolby Pro Logic and Dolby Pro
Logic II decoding do not
function for DTS format signals.
L DTS
Lights up when DTS signals are
input.
Note
When playing a DTS format
disc, be sure that you have made
digital connections and the audio
input mode for VIDEO 2 input
or SA-CD/CD input is not set to
"V2 ANLG" or "CD ANLG".
M SW
Lights up when the audio signal
is output from the
SUBWOOFER jack.
www
.
http://www.xiaoyu163.com
3 4 5 6
INPUT SELECTOR MASTER VOLUME
PRESET TUNING SOUND FIELD MUTING
VIDEO 1 VIDEO 2 DVD SA-CD/CD TUNER
AUTO CAL MIC
q; 9 8 7
Name Function
G MASTER
Turn to adjust the volume
VOLUME level of all speakers at the
same time.
H AUTO CAL MIC
Connects to the supplied
jack ECM-AC2 optimizer
microphone for the Auto
Calibration function.
I SOUND FIELD
Press to select a sound
+/– field.
J PRESET TUNING
Press to select a preset
+/– station.
x ao u163
y
i
http://www.xiaoyu163.com
SECTION 1
GENERAL
2 9
8
About the indicators on the display
1 2 3
SLEEP
L
C R
LFE
DTS
SW SL S SR
qd qs
Name Function
A
Lights up when the disc being
LFE
played back contains an LFE
(Low Frequency Effect) channel
and the LFE channel signal is
actually being reproduced.
B SLEEP
Lights up when the sleep timer is
activated.
C Playback
The letters (L, C, R, etc.) indicate
channel the channels being played back.
indicators The boxes around the letters vary
to show how the receiver
downmixes the source sound.
L Front Left
R Front Right
C Center (monaural)
SL
Surround Left
SR Surround Right
S Surround (monaural or the
surround components obtained
by Pro Logic processing)
Example:
Recording format (Front/
Surround): 3/2.1
Sound Field: A.F.D. AUTO
SW
D ;DIGITAL
Lights up when Dolby Digital
signals are input.
Note
When playing a Dolby Digital
format disc, be sure that you have
made digital connections and the
audio input mode for VIDEO 2
input or SA-CD/CD input is not
set to "V2 ANLG" or "CD
ANLG".
Q Q
3 6 7 1 3 1 5
Rear panel
1 2
ANTENNA
SA-CD/CD VIDEO 2 VIDEO 1
L L
AM
U
R R
OPT IN OPT IN COAX IN
AUDIO IN AUDIO IN
SA-CD/CD VIDEO 2 DVD
4
A ANTENNA section
FM
ANTENNA
AM
ANTENNA
B AUDIO INPUT section
AUDIO IN
White (L)
jack
Red (R)
C SPEAKER section
Connects to speakers.
The following table shows
the respective color for the
speaker jacks.
Speaker jack
FRONT R
(Front right speaker)
FRONT L
(Front left speaker)
SUR R
(Surround right speaker)
SUR L
co
(Surround left speaker)
CENTER
(Center speaker)
SUBWOOFER
.
(Sub woofer)
STR-KS1000P
This section is extracted from
instruction manual.
9 4 2 8
4
DIGITAL
PL
OPT COAX
qa q; 9
Name Function
E Preset
Lights up when using the
station receiver to tune in radio stations
indicators you have preset. For details on
presetting radio stations.
F D.RANGE
Lights up when dynamic range
compression is activated.
G Tuner
Lights up when using the
indicators receiver to tune in radio stations,
etc.
H MEMORY
Lights up when a memory
function, such as Preset Memory,
etc., is activated.
I COAX
Lights up when the DVD input is
selected.
J OPT
Lights up when
– audio input mode for VIDEO 2
input is set to "V2 AUTO" and
the source signal is a digital
signal being input through
VIDEO 2 OPT IN jack.
– audio input mode for SA-CD/
CD input is set to "CD AUTO"
and the source signal is a
L C R
digital signal being input
through SA-CD/CD OPT IN
SL SR
jack.
– audio input mode for VIDEO 2
input or SA-CD/CD input is set
to "V2 OPT" or "CD OPT".
0 5 8 2 9 9 4 2 8
– + – + – + – + – + – +
AUDIO IN FRONT R FRONT L SUR R SUR L CENTER SUBWOOFER
3
D DIGITAL INPUT section
Connects to the OPTICAL Connects to a DVD
FM wire antenna IN jack player, etc. The COAX
supplied with this IN jack provides a better
receiver. quality of loud sound.
COAXIAL
Connects to the
IN jack
AM loop antenna
supplied with this
receiver.
Connects to a
satellite tuner, CD
player, etc.
Color
Red
White
m
Grey
Blue
Green
Purple
9 9
5 6
D.RANGE
MEMORY RDS
ST MONO
8 7
9 9
3