Toyota 2007 Highlander Owner's Manual page 244

There are initial setting switches on the
"Setup Menu 1" and "Setup Menu 2"
screens.
To change the screen, push the "Page1"
or "Page2" switch on the screen.
After you change the initial setting, push
the "Enter" switch. The initial
switch will be turned off and return to the
picture previously.
When the "Default" switch on "Setup Menu
2" is pushed, all menus are initialized.
220
setting
CHANGING THE AUDIO LANGUAGE
Push the "Audio Language" switch on the
"Setup Menu 1" and the "Select Audio
Language" screen appears.
Select the language you want to hear on
the screen.
To return to the "Setup Menu 1" screen,
push the "Back" switch.
If you cannot find a language you want to
hear, push the "Others" switch. The "Enter
Audio Lang. Code" screen will appear.
'07 HIGHLANDER_U (L/O 0608)
To enter the code of the language you
want to hear, push the number of the
language code. For details about the lan-
guage codes, see the language code list.
If you enter a wrong number, push the
"Clear" switch to delete the number.
If numbers which are not on the list are
entered and the "Enter" switch is pushed,
the "Incorrect Code" screen will appear.
Push the language code you want to hear
again.
To return to the "Select Audio Language"
screen, push the "Back" switch.
2007 HIGHLANDER from July '06 Prod. (OM48682U)