Samsung HL-S5088W Owner's Instructions Manual page 172

Press the .. or
~
button to select the Antenna
connection, then press the ENTER button.
• Air: "Air" antenna signal
Cable: "Cable" antenna signal
Air+Cable : "Air" and "Cable" antenna signals
Auto Program
Select the antennas to memorize
Air
~
/yr.Cabl,,--
-~-~-
- - -
•• Move GEnter [T Return
When selecting Cable TV system:
Press the ENTER button to start the auto program.
By default, the cable TV system is set to "STD".
If you want to select another type of cable system,
press the" or
~
button to select "STD", "HRC" or
"IRC". Press the ENTER button.
• STD, HRC and IRC identify various types of cable
TV systems.
Contact your local cable company to identify the type
of cable system that exists in your partcular area.
At this point the signal source has been selected.
Auto Program
Select the cable system
Analog
~
HRC IRC
Digital STD HRC IRC
... Move
a
Enter
1, _
Return
Press the ENTER button to start the auto program.
The TV begins memorizing all available stations.
Press the ENTER button at any time to interrupt the
memorization process.
Select "Retum" by pressing the .... or ... button,
then press the ENTER button to retum to the previous
menu. Press the EXIT button to exit.
Auto Program
Select the cable system
Analog , ,: HRC IRC
Digital
~..::.;~
HRC IRC
... Move 8 Enter Return
• The TV must be connected to an antenna/cable in
order to receive digital TV signals. Even if a
particular channel is deleted from the memory, you
can always tune to that channel directly by using the
number buttons on the remote control.
Auto Program
Auto Program
In
progress Cable 3
-----.----~ __.J
85%
~
2 Enter Return
. .
to
i
Changing the Picture Standard
You can select the type of picture which best corresponds to
your viewing requirements.
'''t
Press the MENU button, Press the" or ~ button to
"Ji '"
select "Picture", then press the ENTER button.
Press the .... or'" button to select "Mode",
then press the ENTER button,
Press the .... or'" button to select "Mode",
then press the ENTER button.
Press the .... or ... button to select the desired
picture mode (Dynamic, Standard, Movie, Custom),
then press the ENTER button.
• Choose Dynamic for viewing the TV during the day
or when there is bright light in the room,
• Choose Standard for the standard factory settings.
• Choose Movie when viewing the movie.
• Choose Custom if you want to adjust the settings
according to personal preference,
n."
~
Press the EXIT button to exit.