Using The Aux Jack - The Singing Machine iSM1020BT Instruction Manual

Operation

Using the AUX Jack

1
Connect the unit as described
previously. Press the ON/STANDBY
button to turn the unit on; the
On/Standby indicator will light blue and
the LCD Screen
will display below:
2
Connect the external unit to the
VIDEO/AUX in jacks on the rear of this
unit as shown on page 8.
Notes:
• It is highly recommended to set the volume
on the auxillary unit to 1/3 or lower to
avoid distortion.
• Skipping files/tracks is not possible when
using an external device.
3
Repeatedly press the FUNCTION
button until the LCD Screen displays
"Aux" on the upper left hand corner of
the LCD screen.
4
Slide the MONITOR switch to the On
(right) position to view the video from
the external device or slide to the Off
(left) position to turn the LCD Screen
off.
5
Connecting an external unit will allow
the audio and video to be played
through your Singing Machine (provided
that the other device is compatible.).
6
Adjust the volume to a comfortable
level using the MASTER VOLUME
control.
7
Connect the microphone(s) as illustrated
on page 9. Slide the ON/OFF switch on
the microphone to power it on or off.
19