Connecting The Lan Cable - Mitsubishi Electric GB-50ADA-A Installation Instructions Manual

6-4. Connecting the LAN cable

Connect the LAN cable to the LAN connector on the GB-50ADA.
• The maximum distance between the HUB and GB-50ADA is 100 m (328 ft).
• The LAN cable is field-supplied. Use a category 5 or above cable (straight cable).
• Use the switching HUB.
MODEL :
Serial number :
CAUTION • Install the LAN cable before installing the unit, and route the cable in the same way as the M-NET transmission
lines.
• Leave enough space around the LAN port on the GB-50ADA to allow for the connection of the connector and
the cables. Refer to section
LAN
5 Installation .
- 18 -