Motorola HS820 User Manual page 11

CFJN1012C Manual HS820
English
The headset will automatically initiate a connection with the last device it was connected to either by
powering up the headset or by pressing the multifunction button. If you want to connect the headset
to another device in the paired device list, you must initiate the connection from that device.
Whichever of the eight devices initiates a connection to the headset afterwards, that device then
becomes the "last connected" device.
Placing and receiving calls
You can use the phone as usual to dial a number.
Your headset supports both Hands Free and Headset Profiles. Accessing call functions depend on
which profile your phone supports.
Note: some phones do not support all features listed. See your phone's user's guide.
You can activate call functions for both Hands Free and Headset Profiles (Headset ON) according
to the following table:
Function
Receive a call
Make a voice dial call
Redial a number
End a call
Transfer call from phone to headset
Put an active call on hold
Toggle between two calls
Reject a call
Note: if the link abnormally disconnects (for example, out of range) the headset tries to reestablish
the link.
Using your headset indicator (LED)
Headset indicator (LED)
With charger plugged in:
Headset indicator
ON
OFF
8
29/06/2004 15:09
Phone Status
ON – phone rings
ON - idle
ON – voice dialing turned on or off
ON – in call
ON – in call
ON – in call
ON – in call, another call in coming in
ON – in call, another call is on hold
ON – phone rings
Headset
Charging in progress
Charging complete
Page 11
Handsfree Profile Action
Short press n
Short press n, speak name
Long press n
Short press n
Short press n
Long press n
Long press n
Long press n