Before Using The Multi-Information Display; Switch Operation - Toyota 2001 Prius Owner's Manual

Before using
the multi–information display
26p049
Operate the multi–information display
with the ignition switch on.
When the ignition switch is turned to
"ON", the initial "TOYOTA" screen appears
and the system begins operating.
After a few seconds, the previous mode
display will appear.
If the electrical power source has been
disconnected from the multi–information
display, the display will be automatically
set to the initial mode.
CAUTION
Do not adjust the display while the
vehicle is moving. Be sure to adjust
the display only when the vehicle is
stopped.

Switch operation

This system operates mainly
switches on the screen. To protect the
screen, lightly touch switches
screen with your finger. When you touch
a switch on the screen or on the bezel,
a beep sounds.
D
If the system does not respond to a
touch of a switch, move your finger
away from the screen and then touch
it again.
D
You cannot operate dimmed switches.
D Wipe off fingerprints on the surface of
the display using a glass
cloth.
by the
on the
cleaning
111