Toyota 2005 4Runner Owner's Manual page 232

Cassette tape player
To fast forward a cassette tape, push and
hold the " " (TUNE/TRACK) button until
"FF" will appears on the display. Push and
hold the " " (TUNE/TRACK) button until
"REW" appears on the display to rewind
a tape.
Use this button to skip up or down to
locate a song or recording.
You can select up to nine recordings (in-
cluding current one).
Push the " " or " " (TUNE/TRACK) but-
ton. "FF 1" or "REW 1" will appear on the
display.
Next, push either side of the track button
until the number on the display reaches
the number of tracks you want to skip. If
you push the button 10 times, the skip
feature will be turned off.
For the skip feature to work correctly a
blank space of at least 3 seconds is con-
sidered to be a start of a recording.
When the beginning of a tape is reached,
the player automatically resumes play.
When the end of the tape is reached, the
player automatically reverses sides and
resumes normal play.
222
'05 4Runner_U (L/O 0504)
In addition, the feature may not work well
with some spoken, live, or classical re-
cordings.
Compact disc player
Use this button to skip up or down to a
different track.
Push the " " or " " (TUNE/TRACK) but-
ton until the number of the track you want
to listen to appears on the display. If you
want to return to the beginning of the
current track, quickly push the
(TUNE/TRACK) button one time.
Push and hold the " " or " " (TUNE/
TRACK) button to fast forward or reverse
within a disc. When you release the but-
ton, the compact disc player will resume
playing.
With compact disc changer only—
You can either scan the tracks on a spe-
cific disc or scan the first tracks of all the
discs in the changer.
Scanning the tracks on a disc:
Quickly push and release the " " or "
(TUNE/TRACK) button. "LOAD" will appear
on the display and the player will scan all
the tracks on the disc you are listening to.
To stop scanning, push this button again.
If the player scanned all the tracks on the
disc, it will stop scanning.
Scanning the first tracks of all the discs
in the changer:
Push and hold the " " or "
TRACK) button. The player will scan the
first track of the next disc. To stop scan-
ning, release the button. If the player has
scanned all the discs, it will stop scan-
ning.
3. "ON/SOURCE" button
Push the "ON/SOURCE" button to turn on
the rear seat audio system.
" "
Use the "ON/SOURCE" button to select an
audio mode when the rear seat audio sys-
tem is on. Each time you push this but-
ton, the system changes between the ra-
dio, cassette player, compact disc player
and compact disc changer.
When you change the mode, the display
indicates which mode is selected.
When a cassette tape and discs are not
loaded in the front audio system, only a
radio mode can be selected in the rear
seat audio system.
"
" (TUNE/