Pioneer SX-3600 Operating Instructions Manual page 7

CO N NE C TI O N S
TURN TA BL E GON NEC TI ON S ( Fi g. 2 )
Connect the output cords of a turntable to the PHONO
input jacks. Be sure to connect left (L) channel and right
(R) channel correctly. Connect the ground lead of the
turntable to the GND terminal on the receiver.
NOTE:
The way in which the output cords are attached will depend on
the rype of cartridge
used. lf you intend to use a low'output
moving coil (Md cartridge, always provide a special MC trcns'
former or a head amqlifier.
A U X JA CK GON NE CTION S (Fig .3)
These jacks can be connected to the OUTPUT (PLAY)
jacks on a TV tuner, cartridge tape player or tape deck.
Use connecting cords with pin plugs to connect the OUT-
PUT jacks on the component with the AUX iacks' Connect
the left channel and right channel properly.
T APE DE CK CON NE CTION S (Fi s.4)
The receiver is provided with two sets of recording (TAPE
REC) output jacks and two sets of playback (TAPE PLAYI
input jacks. Connect each of the jacks in the following way
using the connecting cords which come with the tape deck.
The upper row of jacks is for the left channel (L) and the
lower row for the right channel (R).
Connections for recording
Connect the recording input jacks (INPUT REC) on the
tape deck to the TAPE 1 REC jacks on the receiver.
Connections for playback
Connect the playback output jacks (OUTPUT PLAY) on
the tape deck to the TAPE 1 PLAY jacks on the receiver'
TAPE 2 JACK GONNEGTIONS (Fig.5)
A second tape deck or other adaptor component can be
connected to these terminals.
sx-3600
o .0 0o o o! oo o o o
TV tuner
sx-3600
o.rr oo o0 0o oo o
AUX input jacks
sx-3600
o .ro oo oo oo oo o
sx-3600
o.r roo oo roo oo
Fi g. 3
Tape deck 1
Reverberation amplif ier
F i s . 4
F i s. 5
7
Turntable
+@)@
i@r@
Recording connections