Table of Contents
Advertisement
External connection
Antenna connection
The antenna input impedance used in this model is 75ohm, just connect 75ohm co-
axial cable of VHF/UHF antenna to the antenna jack on the back of TV directely. If you
use 300 flat feeder, you need connect it with one 300 /75ohm converter first, then
connect the converter into the antenna jack.
Note:
It is recommended to use 75ohm coaxial cable to eliminate interference and
noise caused by radio wave.
Do not bind the antenna cable and power cord together.
Connect to Audio equipment
Connect this unit with the audio input terminal (pinhole) of a stereo system, then you
may enjoy quality sound at the same time of enjoying quality picture.
6
(White)
(Red)
To external equipment input
（White)
(Red)
Stereo System
Advertisement
Table of Contents
