BenQ EW2750ZL User Manual page 12

2. Connect the PC video cable.
To Connect the D-Sub Cable
Connect the plug of the D-Sub cable (at the end
without the ferrite filter) to the monitor video socket.
Connect the other end of the cable (at the end with the
ferrite filter) to the computer video socket.
Tighten all finger screws to prevent the plugs from
accidently falling out during use.
To Connect the HDMI Cable
Connect the plug of the HDMI cable to the HDMI port
on the monitor. Connect the other end of the cable to
the HDMI port of a digital output device.
To Connect the MHL Cable (selected models only)
Connect the plug of the MHL cable to the HDMI / MHL
port of the monitor. Connect the other end of the cable
to the MHL port of the digital output device.
Not all mobile devices are MHL-enabled, consult with
your mobile device dealer to verify MHL capabilities.
If there is more than one video transmission method
available to you, you might want to take the picture quality
of each video cable into consideration before making the
connection.
- Better quality: HDMI, MHL
- Good quality: D-Sub
The video cables included in your package and the socket
illustrations on the right may vary depending on the product
supplied for your region.
12 How to assemble your monitor hardware
Either
Or
Or