Switching From Digital To Analog Mode; Receiving A Call; Unanswered Call Indicator - Motorola digital cellular phone Manual

Basics of Using Your Phone
(continued)

Receiving a Call

Your phone must be powered on to receive calls.
To answer a call:
1. Extend the antenna completely for best performance.
2. Press æ or open the phone when the phone rings.
Note: Opening the phone will not answer the call if the Open
to Answer feature is off. (See "Open to Answer" on page 82.)

Unanswered Call Indicator

When you cannot take a call, your Digital StarTac Cellular
Telephone keeps a count of your unanswered calls. Your
phone alerts you with the message
number of calls not answered.
Press Ç or º to erase the message, and you can
begin placing calls again.
Ringer Suppress
You can terminate either the ring or the vibration by pressing
one of the volume keys during the ring/vibrate cycle. The
caller will continue to hear ringing.
Viewing Your Own Number
To find out your phone's number:
Press ‰ , then press » .
Switching from Digital to
Analog Mode
During a call, you can switch from digital to analog mode:
To switch to analog mode, press
press ¤ .
, where XX is the
Call XX
ƒ , then
21