DOOR HINGE ASSEMBLY
SWITCH ASSEMBLY, DOOR LOCK
WHEN FOREIGN OBJECT STUCK BETWEEN DRUM AND TUB
Hole
Washing Heater
Two screws are unscrewed on the door and
the door is disassembled.
The cabinet cover clamp is removed and the
gasket is released.
Two screws are unscrewed on the door hinge.
The door hinge is disassembled by pushing
the door hinge arm inside the cabinet cover.
The cabinet cover clamp is removed and
the gasket is released.
Two screws are unscrewed.
The door lock S/W is disconnected form the
wiring connector and the strap.
Remove washing heater.
Remove the foreign object(wire,coin,etc) by
inserting long bar in the hole.
37