Splits; Layers; Style Mode - Williams SYMPHONY GRAND Owner's Manual

SY M P H O NY G RAN D D I G ITAL P IAN O

SPLITS

Split Mode allows the keyboard to be divided
into two sections so that different voices may
be played with the left and right hands. The
volume may be independently adjusted for each
voice, the Split Point (the highest note played
with the left hand) may be adjusted and the
Split Voice may be changed as desired.
To Enter Split Mode
Press the [SPLIT] button. The Split (left hand)
voice will be the Acoustic Bass and the last
Split Point used.
To Change the Split Mode Settings
Press the FUNCTION button. On Main Setting
Page 2 you can change parameters for the Split
mode by selecting the setting you want with the
page buttons to adjust and turning the Value
dial to change the parameters.
Split Point - B2: 39 (MIDI Notes). This
determines the split point on the keyboard
when the Split Mode is enabled.
Split Volume - Default is 100
Split Octave - Default is 0

LAYERS

The Layer Mode allows you to layer up to 2
different sounds on top of each other.
To Enter Layer Mode and Select Sounds
1. Select the primary sound you want to use.
For this example use the Grand Piano.
2. Press the Layer Button. You should be
hearing both the Grand Piano and a String
section sound together.
3. To change the 2nd layer (Strings) press
and hold the Layer button. You will see the
display sound the Strings picture.
4. While holding down the Layer button turn the
dial to select another sound and then release
the Layer button.
W ILLIAM S P IAN OS. CO M
5. The Layer button will go off. Press it again.
You should now hear the new sound that you
selected play when you play on the keyboard.
To Change the Layer Mode Settings
Press the FUNCTION button. On Main Setting
Page 3 you can change the volume parameters
for Layer mode by selecting the setting you
want with the page buttons to adjust and
turning the Value dial to change the parameters.

STYLE MODE

The Style Arranger Mode is a feature that allows
you to play pre-programmed arrangements
(drums, bass, keys, guitar, etc) with your left
hand and play the lead melody on your
right hand.
Selecting Styles
1. Press the STYLE button.
2. The Display will show a list of Styles that you
can select from to play.
3. Turn the Value Dial to highlight the Style that
you want to play.
Controlling the Styles
1. Press the Start/Stop button on the Transport
controls. You should hear a drumbeat
playing.
13