4. OPERATING PROCEDURE
-
Remove the trim pulling it using the
towing eye.
-
Loosen the wheel bolts and start
unscrewing them.
-
Place the jack in contact with the
locating point provided, the one which is
closest to the wheel to be changed.
Ensure that the jack is straight and that
the base of the jack is fully in contact
with the ground.
-
Extend the jack to lift the wheel clear of
the ground.
-
Resume and complete the unscrewing of
the wheel bolts.
-
Remove the bolts and remove the
wheel.
Changing a wheel
Do not extend the jack until you have
started unscrewing the bolts on the
wheel to be changed and have placed
the chock under the wheel diagonally
opposite.
7