Disassembly Instructions - Mitsubishi Electric MU-A09WA Service Manual

9

DISASSEMBLY INSTRUCTIONS

<"Terminal with locking mechanism" Detaching points>
The terminal which has the locking mechanism can be detached as shown below.
There are two types ( Refer to (1) and (2)) of the terminal with locking mechanism.
The terminal without locking mechanism can be detached by pulling it out.
Check the shape of the terminal before detaching.
(1) Slide the sleeve and check if there is a locking lever or not.
Sleeve
Locking lever
9-1. MU-A09WA
OPERATING PROCEDURE
1. Removing the cabinet.
(1) Remove the screw fixing the service panel.
(2) Pull down the service panel and remove it.
(3) Remove the conduit cover.
(4) Disconnect the power supply wire and indoor/outdoor con-
necting wire.
(5) Remove the screws fixing the top panel.
(6) Remove the top panel.
(7) Remove the screws fixing the cabinet.
(8) Remove the cabinet.
(9) Remove the screws fixing the back panel.
(10) Remove the back panel.
Photo 2
Conduit cover
1Slide the sleeve.
2Pull the terminal while
pushing the locking
lever.
Photo 1
Screw of the
conduit cover
Conduit plate
17
(2) The terminal with this connector has the
locking mechanism.
1Hold the sleeve, and
pull out the terminal
slowly.
Connector
PHOTOS
Screws
Screw of
of the
the cabinet
top panel
Screws of
the cabinet
Screws of
the top panel
Back
panel
Screw of
the service
panel
Hooks
Service
panel