Motorola Renegade V950 User Manual page 61

Note All Direct Connect users with Nextel or PowerSource
phones must always use an " * " between digits, even
if they are calling another use whose DC number is
the same as their wireless phone number. Be sure to
include " * " when you give your number to a Nextel or
PowerSource user. For example, if your DC number
is 555-555-1234, when giving this number to a Nextel
user it would be "555 * 555 * 1234".
5.
Press Done (left softkey) to save the entry.
Tip
You can also save a Direct Connect number from
History. From a History listing, press Options > Save ,
and then complete steps 3–5 above.
Blocking a Direct Connect Number
S
1.
Press >
Contacts
2.
Highlight an entry and press
3. Highlight the DC-capable phone number (See "To
tell if a number is a valid Direct Connect number:"
on page 32.)
4.
Press Options (right softkey) >
5. Press (left softkey) to block the number.
Block
.
S
.
Block DC Calls.
Unblocking a Direct Connect Number
S
1.
Press > Contacts
2.
Highlight an entry and press
3.
Select the DC-capable phone number.
4. Press (right softkey) >
Options
5.
Press (left softkey) to unlock the number.
Allow
Creating Groups in Contacts
Creating Group entries in your Contacts list makes it
easy to make Group Connect calls. Once you have
created Groups, you can communicate to everyone in
a group simultaneously.
Note Currently, Sprint phones do not support Group
Connect calls with Nextel or PowerSource phones.
When creating a group list, please make sure to
include only users with Sprint phones.
Types of Groups
Your Contacts can contain two types of Groups:
Section 2B. Nextel Direct Connect
.
S
.
.
Allow DC
45