Motorola I290 User Manual page 60

may need to ensure that the created
virtual COMM port settings are set as
follows:
• Bits per second: 4800
• Data bits: 8
• Parity: None
• Stop bits: 1
• Flow control: None.
4 Start the GPS application on your host
device. Set the GPS application to start
accepting NMEA-0183 formatted data
from the created Virtual COMM port.
5 Set your phone to start sending NMEA-
0183 formatted location information.
Find it: M > GPS > Interface > NMEA OUT > USB.
Your phone is now actively sending location
NMEA-0183 formatted GPS data to your USB
host device.
54
basics
To stop your phone from sending location
data:
Find it: M > GPS > Interface > NMEA OUT > Off.
Note: Each time you power your phone Off,
NMEA OUT is automatically set to Off and
you need to manually restart it using the
menu selections above.
Your USB host device will generally provide
charging power (5V, up to 500mA) to your
phone via the mini-USB cable therefore no
other charging power to it will normally be
required. However some laptops may require
that you provide external AC/DC power to the
laptop in order for it to provide full 500mA
charging current capability to the phone.