NOTE:
•
Be sure to keep the throttle fully
closed when changing the mode.
If the change of mode is not possi-
ble because the throttle is not fully
closed, a segment of the selected
mode on the traction control sys-
tem display blinks.
•
The setting is retained in the
memory even when the ignition
switch is turned off.
•
The setting of the traction control
system is retained in the memory
even when the battery becomes
fully discharged or is discon-
nected and removed from the
motorcycle.
RIGHT HANDLEBAR
(EU)
ENGINE STOP SWITCH 1
"" position
The ignition circuit is off. The engine
cannot start or run.
"" position
The ignition circuit is on and the
engine can run.
FRONT BRAKE LEVER 2
The front brake is applied by squeez-
ing the brake lever gently toward the
throttle
grip.
equipped with a disk brake system
and
excessive
required to slow the machine down
properly. The brake light will be lit
when the lever is squeezed inward.
2-29
This
motorcycle
pressure
is
is
not