Optional Accessories; Technical Data; Consumption Rates; After-Sales Service - Bosch WTA74200AU Instruction Manual

Optional accessories

Exhaust air duct set
WTZ
The exhaust air is extracted via a hose.
1130
Washer-dryer stack connection set
WTZ
The dryer can be placed on top of a suitable washing machine with the same width and depth
11311
to save space. The dryer must be fastened to the washing machine using this connection set.
If the worktop of the washing machine is less than 544 mm deep, please consult the
after-sales service or your specialist retailer.
Platform
WMZ
For easier loading and unloading. The basket contained in the drawer can be used
20500
to carry the laundry.

Technical data

Dimensions (DxWxH)
Weight
Max. capacity
Connection voltage
Connected load
Fuse protection
Ambient temperature
Product number
Production number
The rating plate can be found on the back of the dryer.

Consumption rates

Residual moisture in the fabrics
Fabrics/programmes
Cottons 7 kg
. Cupboard Dry* 1400 rpm
1000 rpm
Iron Dry* 1400 rpm
1000 rpm
Synthetics 3.5 kg
. Cupboard Dry*
* Programme setting for testing in accordance with applicable standard DIN EN61121.
** The values may differ from those specified, depending on the type of fabric, composition of
laundry to be dried, residual moisture in the fabric and the amount of laundry being loaded.
(order from the after-sales service using the order number, according to model)
60 x 60 x 85 cm (height adjustable)
approx. 36 kg
7 kg
220-240 V
2200 W
10 A
5 - 35°C
Inside of door
Drying time**
after spinning
(50%) 107 min
(60%) 128 min
800 rpm (70%) 149 min
(50%) 83 min
(60%) 99 min
800 rpm (70%) 116 min
800 rpm (40%) 47 min
600 rpm (50%) 59 min

After-sales service

If you cannot rectify the fault yourself (e.g. switching off/on)
please contact our after-sales service. We will always find an appropriate solution and avoid
unnecessary visits by engineers.
The contact details of your local after-sales service can be found in the enclosed after-sales
service directory.
– GB 0344 892 8979 (Calls charged at local or mobile rate.)
– IE 01450 2655 (0.03 € per minute at peak. Off peak 0.0088 € per minute.)
Please provide the after-sales service the product number (E no.) and the production number
(FD) of the appliance.
Product number
Trust the expertise of the manufacturer. Contact us for assistance. In this way, you can rest
assured that the repair will be carried out by trained service technicians using original spare
parts.

What to do if ...

Turn the programme selector to Off and remove the mains plug from the socket.
The Start/Pause indicator light
does not light up.
Energy
consumption**
The display panel light and
indicator lights (depending on
model) go out and the
3.16 kWh
Start/Pause indicator light
3.95 kWh flashes.
The display panel switches off.
4.60 kWh
1.96 kWh
(Fluff filter/Exhaust air duct)
2.92 kWh
indicator light flashes.
3.63 kWh
1.32 kWh
1.72 kWh
Dryer does not start.
Programme terminates shortly
after starting.
Water is leaking out.
10
You can find this information:
inside the door* / in the opened service flap*
and on the rear of the appliance.
*depending on the model
Production number
Mains plug plugged in?
Programme selected?
Check the socket fuse.
Energy-saving mode is activated
Energy-saving mode instructions.
The appliance goes into the sleep mode after activating
Finished in option page 5.
Clean the fluff filter page 4.
Press the Start/Pause button to reset the displayed
indication and then press the
again to restart the appliance if necessary.
Exhaust air duct blocked or bent?
Clean the exhaust air duct
If necessary, clean the insect screen on the exhaust air
pipe.
Start/Pause button selected? Door closed?
Programme set?
Ambient temperature greater than 5°C?
Is the appliance loaded with the laundry?
Load too small for selected programme?/Use timed
programme page 6/7.
Loaded laundry dry?
Make sure the dryer is level.
What to do if..., page 11/12,
see the separate
Start/Pause button
page 8.
11