Getting To Know Your Zotac Zbox; Front View - Zotac ZBOX series User Manual

ZOTAC ZBOX

Getting to know your ZOTAC ZBOX

Front view

Refer to the diagram below to identify the components on this side of the system
1. Power switch
The power switch allows powering ON and OFF the system. The ring LED can be
disabled in BIOS setting.
2. Memory card slot
The built-in memory card reader reads and writes SD/SDHC/SDXC cards used in
devices such as digital cameras, MP3 players, mobile phones and PDAs.
3. Power LED
The Power LED blinks when power is on.
4. WiFi LED
The WiFi LED blinks when data is being transfered over WiFi.
5. Hard disk LED
The hard disk LED blinks when data is being written into or read from the hard disk
drive.
6. Microphone jack
The microphone jack is designed to connect the microphone used for video
conferencing, voice narrations or simple audio recordings.
7. Headphone/Audio Out jack
The stereo headphone jack (3.5mm) is used to connect the system's audio out
signal to amplified speakers or headphones.
8. USB 3.0 port
The USB 3.0 port supports the SuperSpeed USB 3.0 devices and is backwards
compatible with USB 2.0/1.1 devices. Use this port for USB 3.0 devices for
maximum performance with USB 3.0 compatible devices.
6
1 2 6
3 4 5
7
8