Video Settings (Video) - Sony RDR-GX300 Service Manual

QQ
3 7 63 1515 0
4
Select "System," and press ENTER.
Settings - Channel Setting
System : BG BG
Normal / CATV : Normal DK
Channel Set : C1
I
Station Name : ARD
L
PAY - TV / CANAL+ : On
Audio : NICAM
5
Select an available TV system, BG, DK, L, or
I, and press ENTER (see page 85).
BG Select this when in West European
countries, except those listed in
"Receivable channels" (page 85).
DK
Select this when in East European
countries.
I Select this when in Great Britain/
Ireland.
L Select this when in France.
6
Select "Normal/CATV," and press ENTER.
Settings - Channel Setting
System : BG
Normal / CATV : Normal Normal
Channel Set : C1 CATV
Station Name : CDE
PAY - TV / CANAL+ : Off
Audio : NICAM
7
Select "Normal," and press ENTER.
To set CATV (Cable Television) channels,
select "CATV."
8
Select "Channel Set," and press ENTER.
Settings - Channel Setting
System : BG
Normal / CATV : Normal
Channel Set : C2 C1
Station Name : CDE
PAY - TV / CANAL+ : Off
Audio : NICAM
9 Press M/m repeatedly until the channel you
want is displayed, then press ENTER.
The channels are scanned in the order shown
in the table below.
• If you know the number of the channel you
want, press the number buttons. For
example, for channel 5, first press "0" and
then press "5." Then press ENTER.
TE
L 13942296513
84
4 Press M/m until the selected channel row
moves to the desired programme position.
The selected channel is inserted at the new
programme position.
Settings - Channel List
Prog Channel
1 C3
2 C12
3 C21
4 C5
5 C23
6 C24
5
Press ENTER to confirm the setting.
6
To change or disable the programme position
of another station, repeat from step 3.
Note
Be sure to correctly select the programme position you
want to disable. If you disable the wrong programme
position by mistake, you need to reset that channel
manually.
Clock
Auto Adjust
Turns on the Auto Clock Set function when a channel
in your local area broadcasts a time signal.
1
Follow steps 1 to 3 of "Using the Setup
Displays" (page 82) to select "Settings" in the
Setup Display.
2
Select "Clock," and press ENTER.
Settings - Clock
Auto Adjust : Off
Present Time : Thu
3
Select "Auto Adjust," and press ENTER.
Settings - Clock
Auto Adjust : Off Off
Present Time : Thu
4 Select "On," and press ,.
www
5 Press M/m repeatedly until the programme
position of the station that carries a time signal
appears, and press ENTER.
Settings - Clock
Auto Adjust : On Off
.
Present Time : Thu
86
http://www.xiaoyu163.com
10
Select "Audio," and press ENTER.
Prog. 8 Settings - Channel Setting
System : BG
Normal / CATV : Normal
Channel Set : C5
Station Name : CDE
PAY - TV / CANAL+ : NICAM Off
Audio : Standard NICAM
NICAM
Normally, select this.
Standard Select this if the sound from
NICAM broadcasts is not
clear.
11
Select "NICAM," and press ENTER.
12
Select "AFT" and press ENTER.
Settings - Channel Setting
Normal / CATV : Normal
Channel Set : C5
Station Name : CDE
PAY - TV / CANAL+ : Off
Audio : NICAM On
AFT : On Off
Prog. 8
On Turns on the Auto Fine
Tuning function. Normally,
select this.
Off Allows you to adjust the
pictures manually.
13
Select "On" to turn on AFT, and press
ENTER.
• If the Auto Fine Tuning function does not
Prog. 8
work effectively, select "Off" and press
ENTER. When the fine tuning bar appears,
press </, to obtain a clearer picture, and
press ENTER.
Fine Tuning
To preset another channel, repeat from step 3.
• If the recorder does not receive a time signal
from any station, "Auto Adjust" returns to
"Off" automatically and the menu for setting
the clock manually appears on the screen.
z Hint
If you set "Auto Adjust" to "On," the Auto Clock Set
Name
function is activated whenever the recorder is turned off.
AAB
Note
FGH
The Auto Clock Set function does not work while the
PQR
recorder is standing by for Synchro-Recording.
To set the clock manually
If the Auto Clock Set function did not set the clock
correctly for your local area, try another station for
the Auto Clock Set function or set the clock
manually.
1
Follow steps 1 to 3 of "Using the Setup
Displays" (page 82) to select "Settings" in the
Setup Display.
2
Select "Clock," and press ENTER.
3
Select "Auto Adjust," and press ENTER.
Settings - Clock
Auto Adjust : Off Off 1
Present Time : Thu 1. 1. 2004. 21:39
4
Select "Off," and press ENTER.
5
Select "Present Time," and press ENTER.
Clock - Present Time
Set the time and date manually.
1 2004 0 00 :
Thu 1
1
1. 1. 2004. 21:39
6 Press M/m to set the day, and press ,.
Set the month, year, hour, and minutes in
sequence. Press </, to select the item to be
set, then press M/m to set the numbers. The
1 1 ARD
day of the week is set automatically.
1. 1. 2004. 21:39
To change the numbers, press < to return to
the item to be changed, and press M/m.
7
Press ENTER to start the clock.
x ao
y
1 1 ARD
i
1. 1. 2004. 21:39
http://www.xiaoyu163.com
8
Receivable channels
TV system
Prog. 8
BG (West European
Countries, except
those listed below)
DK (East European
Countries)
I (Great Britain/
Ireland)
Prog. 8
L (France)
Station Name
Changes or enters a new station name (up to 5
characters). The recorder must receive channel
information (for instance, SMARTLINK
information) for station names to appear
automatically.
1
Follow steps 1 to 3 of "Using the Setup
Displays" (page 82) to select "Settings" in the
Setup Display.
Prog. 8
2
Select "Channel Setting," and press ENTER.
Settings - Channel Setting
System :
Normal / CATV :
Channel Set :
Station Name :
PAY - TV / CANAL+ :
Audio :
3
Press PROG +/– to select the programme
Q Q
position for which you want to change or enter
3 6 7 1 3
a station name.
Language
OSD (On-Screen Display)
Switches the display language on the screen.
DVD Menu (DVD VIDEO only)
Switches the language for the DVD menu.
Audio (DVD VIDEO only)
Switches the language of the sound track.
When you select "Original," the language given
priority in the disc is selected.
Subtitle (DVD VIDEO only)
Switches the language of the subtitles recorded on
the disc.
When you select "Audio Follow," the subtitle
language changes according to the language you
selected for the sound track.
z Hint
If you select "Others" in "DVD Menu," "Subtitle," or
"Audio," select and enter a language code from
"Language Code List" (page 112) using the number
buttons.
1 ARD
Note
If you select a language in "DVD Menu," "Subtitle," or
"Audio" that is not recorded on the DVD VIDEO, one of
the recorded languages will be automatically selected.
u163
.
1-21
2 9 9 4 2 8
4
Select "Station Name," and press ENTER.
The display for entering characters appears.
Channel coverage
E2 - E12 VHF
Input Station Name
AAB
Italia A – H VHF
E21 – E69 UHF
1 . , - 1
2 A B C 2 Back
S1 – S20 CATV
3 D E F 3 Clear All
4 G H I 4 Space
S21 – S41 HYPER
5 J K L 5
S01 – S05 CATV
R1 – R12 VHF
To enter characters, see page 40.
R21 – R69 UHF
5
Select "Finish," and press ENTER.
S1 – S20 CATV
PAY-TV/CANAL+
S21 – S41 HYPER
Sets the PAY-TV/Canal Plus channels.
S01 – S05 CATV
For details, see page 30.
Ireland A – J VHF
Channel List (Changing/Disabling
South Africa 4 – 13 VHF
the channels)
B21 – B69 UHF
S1 – S20 CATV Changes or disables the programme positions after
setting the channels. If any programme positions
S21 – S41 HYPER
are unused or contain unwanted channels, you can
S01 – S05 CATV
disable them.
You can also change station names. If the station
F2 – F10 VHF
names are not displayed, you can enter them
F21 – F69 UHF
manually.
B – Q CATV
1
Follow steps 1 to 3 of "Using the Setup
Displays" (page 82) to select "Settings" in the
S21 – S41 HYPER
Setup Display.
2
Select "Channel List," and press ENTER.
Settings - Channel List
Prog
1
2
3
4
5
6
3 Press M/m to select the row containing the
programme position you want to change or
disable.
Prog. 1
To change, press ENTER and go to step 4.
BG
Normal To disable, press CLEAR and go to step 6.
C3
The disabled positions will be skipped when
AAB
Off
you press PROG +/–.
NICAM
To display other pages for programme
positions 7 to 99, press M/m repeatedly.
1 5 0 5 8 2 9 9 4

Video Settings (Video)

Video settings will adjust items related to the
image, such as size and colour.
Choose the settings according to the type of TV,
tuner, or decoder connected to the DVD recorder.
1
Press SYSTEM MENU while the recorder is
in stop mode.
2
Select "SETUP," and press ENTER.
3
Select "Video," and press ENTER.
The Video Setup appears with the following
options. The default settings are underlined.
SETUP
Settings TV Type :
Video Pause Mode :
Audio Component Out :
Features Progressive Mode :
Options Screen Saver :
Scart Setting
Easy Setup Line4 input :
TV Type
Selects the aspect ratio of the connected TV (4:3
standard or wide).
16:9 Select this when connecting
to a wide-screen TV or TV
with a wide mode function.
4:3 Letter Select this when connecting
Box to a 4:3 screen TV. Displays
a wide picture with bands on
the upper and lower portions
of the screen.
4:3 Pan Select this when connecting
Scan
to a 4:3 screen TV.
Automatically displays a
m
wide picture on the entire
screen and cuts off the
portions that do not fit.
co
9 9
"A"
6 M N O 6
"a"
7 P Q R S 7
Symbol
8 T U V 8
9 W X Y Z 9 Cancel
0 0 Finish
Channel Name
C3 AAB
C5 FGH
C12
C21
C23
C24 PQR
2 8 9 9
, continued
85
16 : 9
Auto
Off
Auto
On
Video
, continued
87