Power On The Access Point; Configure The Access Point; Installation - D-Link DWL-6600AP Quick Installation Manual
Hide thumbs
Also See for DWL-6600AP:
- Cli command reference (46 pages) ,
- Quick installation manual (6 pages) ,
- Specifications (4 pages)
Table of Contents
Advertisement
Power on the access point
To power on the DWL-6600AP, you can use ONE of the following methods:
1. Connect the supplied power adapter, OR
2. Plug one end of your Ethernet cable into the LAN port of the DWL-6600AP, and
the other end into a port on a PoE switch.
Configure the access point
To set up and manage the DWL-6600AP, use one of the following methods:
1. Connect the access point and your computer directly via a straight-through
Ethernet cable. Manage the access point from the computer.
Ensure your computer is configured with a static IP address in 10.90.90.0/24
subnet.
Launch a web browser, type the default IP address of the access point
(http://10.90.90.91) and then press Enter.
Log in to the Administration Web pages. The default login information is:
Username: admin
Password: admin
DWL-6600AP
D-Link DWL-6600AP Quick Install Guide
3. Installation
Computer
5
Hide quick links:
Advertisement
Table of Contents
