AWA MHDV3720-O3 User Manual page 10

REAR AV Connections
AC-INPUT
100-240V~ 50/60Hz
All the terminals are (from left to right):
AC Power input, Antenna socket, VGA input, AV output, PC AUDIO input, Rear Audio input,
YPbPr (component video) input
Note: 1. AV1 and YPbPr share the Rear Audio input channel.
2. When HDMI1 port receives a DVI signal, the matching audio signal is received by
the PC Audio input.
ANTENNA
Note:
Aerial connections: IEC (female).
Input impedance: 75 unbalanced.
PC
STEPS:
Be sure both the TV and computer are
set to Power off.
1.Connect a VGA and audio cable.
2.Connect the power cord.
3.Power on the TV, switch to PC mode.
4.Power on the PC.
This connection and power-up sequence
is very important.
AC-INPUT
100-240V~ 50/60Hz
VGA INPUT
RF INPUT
, AV1 input, HDMI1 input, HDMI2 input.
Plug (not supplied)
VGA INPUT AV OUTPUT
RF INPUT
L
R
-9-
AV OUTPUT
AUDIO INPUT
L AV
R
For optimum digital TV reception,
the use of high quality shielded 75
coax cable is recommended.
PC
AUDIO INPUT
AV
VGA and audio cable
not supplied
INSTALLATION
HDMI1 INPUT
PC
HDMI2 INPUT
Outdoor antenna (not supplied)
HDMI1 INPUT
HDMI2 INPUT